CYANOACRYLATES
|
|
GA-422 INSTANT ADHESIVES This Cyanoacrylate ester based adhesive sets up into a hard plastic. It will withstand temperatures up to 200°F. The #GA-422 can be used to bond the voice coil to the spider and the cone to the voice coil and affix the gasket to the frame. For poly cones and foam surrounds treat surfaces with Poly Primer. |
|||
| GA Cat. # | Description | Viscosity | Size | |
| GA-422-1 | Clear Instant Adhesive | 2500 cps | 1oz. Bottle | |
| GA-422-2 | Clear Instant Adhesive | 2500 cps | 2oz. Bottle | |
| GA-422-8 | Clear Instant Adhesive | 2500 cps | 8oz. Bottle | |
| GA-422-16 | Clear Instant Adhesive | 2500 cps | 16oz. Bottle | |
| GA-410 BLACK HIGH VISCOSITY INSTANT
ADHESIVES These adhesives are rubber toughened to provide additional flexibility. GA-410 withstands higher temperatures up to 250°F, for coils that are running hot. This adhesive is also good for coating lead wires and bonding foam surrounds to poly cones. When bonding to poly cones use Poly Primer before assembly. |
 |
|||
| GA Cat. # | Description | Viscosity | Size | |
| GA-410-1 | Black Multi-Surface Adhesive | 4500 cps | 1oz. Bottle | |
| GA-410-2 | Black Multi-Surface Adhesive | 4500 cps | 2oz. Bottle | |
| GA-410-8 | Black Multi-Surface Adhesive | 4500 cps | 8oz. Bottle | |
| GA-410-16 | Black Multi-Surface Adhesive | 4500 cps | 16oz. Bottle | |
|
|
GA-400 MEDIUM VISCOSITY BLACK INSTANT
ADHESIVES This medium viscosity version of #GA-410 can be used to bond the dust cap to the cone and voice coil to spider in high heat applications up to 250°F. |
|||
| GA Cat. # | Description | Viscosity | Size | |
| GA-400-1 | Black Multi-Surface Adhesive | 2500 cps | 1oz. Bottle | |
| GA-400-2 | Black Multi-Surface Adhesive | 2500 cps | 2oz. Bottle | |
| GA-400-8 | Black Multi-Surface Adhesive | 2500 cps | 8oz. Bottle | |
| GA-400-16 | Black Multi-Surface Adhesive | 2500 cps | 16oz. Bottle | |
| GA-380 LOW VISCOSITY BLACK INSTANT
ADHESIVES This low viscosity version of #GA-410 can be used to bond the dust cap or used as a filet adhesive around the dust cap. Its low viscosity will allow it to self-level around the dome. It can also be used to penetrate and fill gaps. |
 |
|||
| GA Cat. # | Description | Viscosity | Size | |
| GA-380-1 | Black Multi-Surface Adhesive | 400 cps | 1oz. Bottles | |
| GA-380-2 | Black Multi-Surface Adhesive | 400 cps | 2oz. Bottles | |
| GA-380-8 | Black Multi-Surface Adhesive | 400 cps | 8oz. Bottles | |
| GA-380-16 | Black Multi-Surface Adhesive | 400 cps | 16oz. Bottles | |
|
|
ADHESIVE ACCELERATOR, SURFACE
CONDITIONER & REMOVER This accelerator instantly cures the instant adhesives. A very light spray is enough to cure the instant bonders. Lightning Tack is an Acetone product and is flammable. Use Poly Primer on poly cones and foam to be bonded. The Debonder will remove cyanoacrylate and rubber cements. |
|
| GA Cat. # | Description | Size |
| Lightning Tack-2 | Cyanoacrylate Accelerator | 2oz. Pump Bottle |
| Lightning Tack-8 | Cyanoacrylate Accelerator | 8oz. Pump Bottle |
| Lightning Tack-32 | Cyanoacrylate Accelerator | 32oz. Can |
| Poly Primer-50 | Surface Conditioner | 50ml Pump Can |
| Poly Primer-8 | Surface Conditioner | 8oz. Can |
| Debonder-2 | Adhesive Remover | 2oz. Bottle |
